I. Description
The Genset controller Minco A1 utilizes high performance microprocessor and industrial grade components. It has the property of compact structure, easy installation and complete functions. The controller can control the generating set to start or stop, monitor the working state of generating set, and achieve the auto-protection function. ATS control function. MINCO A1 is a economical auto start and auto-protection control module.

II. Characteristics
1. MINCOA1 has passed the UL certificate.
2. LED display: frequency, battery voltage, running time, fault code
3. Auto start, Auto protection, ATS control.
4. Setting all working parameters by pushbutton menu.50/60HZ currency.
5. Delayed start and delayed stop can be set.
III. Performance
6. LED display:
7. State indication: Start, auto, power supply, running indication
8. Fault indication: Emergency stop, over speed, low battery voltage,
9. high coolant temp, low oil pressure, low fuel level, over crank, loss
10. of the speed signal
11. Switch inputs (Photoelectric isolator, connecting with GND is valid):
12. Emergency stop, remote start, remote reset, high coolant temp, low
13. oil pressure, low fuel level
14. Relay outputs (relay isolation): Start, Fuel (Fuel supply/stop), fault,
15. pre-fuel/pre-heating, excitation, idle
IV. External Features
16. Dimension: Front panel (L×WxD） 96×96x9 mm
17. Back panel（L×WxD）84×84x50 mm
18. Mounting hole: (L×W）85×85 mm
19. Power Supply: DC8-36 V
20. Working environment: -25~70℃
21. Relative humidity <95%
22. 4. G.W.: 300g